Product ID Number
- Part No. 546534

Weight & Dimension
- Length: 7.1250
- Height: 2.0000
- Width: 4.7500
- Weight: 1.8900LB(s)

Hornady® reloading dies represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment and smooth functioning. With one of the finest internal finishes in the industry, Hornady® reloading dies provide a lifetime of reloading. They’re so well-crafted that they’re guaranteed never to break or wear out from normal use. The Hornady® 3-Die Taper Crimp Die Set consists of a Full-Length Size Die that sizes cartridge cases to SAAMI minimum specifications. The included hardened steel Headed Decap Pin and Decap Pin Retainer is mated to a Zip Spindle™ that positively locks to eliminate slippage. A series of light threads cut on both the spindle and spindle lock allows incremental adjustments by turning the spindle or it can easily “zip” up or down for larger movements. The internal die profile is precision machined and polished to a smooth finish for reliable functioning without case sticking or excessive friction. This die features a titanium nitride “gold ring” finish that’s harder than carbide and doesn’t require lubrication. The super hard coating is perfect for resizing soft pistol brass and won’t scratch cases. The second die in this set is a Hornady® Pistol Style Expander die. This die expands the case mouths on straight-walled rifle or pistol cases to achieve proper neck tension on the bullet. In addition it has the ability to put a slight "bell" or flare on the case mouth which prepares the case so powder and bullet insertion are smoother. The third die in this set is a Taper Crimp Seating Die that features intuitive design that allows seating and taper crimping to be completed in one step, eliminating the need for a separate taper crimp die. Precise control is achieved by the use of the Taper Crimp Adjustment Screw that easily adjusts the amount of crimp on the cartridge without changing bullet seating depth or loosening the lock ring. Hornady® Taper Crimp dies feature an alignment sleeve (comes standard – other manufacturers charge extra for this feature) and a seater adjustment screw with lock ring and rubber washer for necessary tension to make fine bullet seating depth adjustments and works to keep the die set together. Key to the Seating Die is the In-line Bullet Seating System that holds the bullet, the case neck and the seating stem in perfect alignment in the floating sleeve

BEFORE

the bullet enters the neck of the case for optimum seating and enhanced accuracy results.

HORNADY® 3-DIE TAPER CRIMP DIE SET COMES COMPLETE WITH THE FOLLOWING:

• Full-Length Size Die and Sure-Loc™ Lock Ring • Spindle Lock • Decap Pin Retainer • Headed Decap Pins • Zip Spindle™ • Hornady® Pistol Style Expander Die and Sure-Loc™ Lock Ring • Taper Crimp Seating Die and Sure-Loc™ Lock Ring • Standard Bullet Seating Stem • Stackable Die Storage Box 7/8”-14 thread dies that works with all presses that accept standard dies. Does not include a shell holder. Other accessories sold separately. Hornady®

Lock-N-Load®

Die Bushings are necessary for use with modern Hornady® reloading presses: Hornady Item number 044094 (2-Pack), 044093 (3-Pack), 044096 (10-Pack). Hornady® recommends spraying all metal parts with Hornady® One Shot® Gun Cleaner & Lube: Hornady Item number 99901 (10 oz aerosol) 9990 (5 oz aerosol). No-risk, Lifetime warranty. See Hornady.com for more information.

MADE IN THE USA