Since 1969

6.5 Creedmoor 140 Grain ELD Match 20 Rounds

Hornady # 81500 |  Item # 003-81500
  • 6.5 Creedmoor 140 Grain ELD Match 20 Rounds
  • 6.5 Creedmoor 140 Grain ELD Match 20 Rounds
  • 6.5 Creedmoor 140 Grain ELD Match 20 Rounds
  • 6.5 Creedmoor 140 Grain ELD Match 20 Rounds
  • 6.5 Creedmoor 140 Grain ELD Match 20 Rounds
  • hornady
$39.99 $37.99
$1.90 Per Piece
Status: In Stock
  • This item has restrictions that may prevent its sale by age or location.


6.5 Creedmoor 140 gr ELD Match
by Hornady Ammunition and Bullets

This Hornady Ammunition is custom-grade from the factory, loaded to stringent specifications to ensure proper ignition and provide shooters consistent, match-winning, pinpoint accuracy, round after round. This round performs as well, if not better, than handloads.

Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a serious issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, especially at extended ranges. To counter this effect, Hornady identified a heat resistant polymer and created the patent pending Heat Shield Tip. This revolutionary new tip creates the ideal meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. The Heat Shield tip defies the effects of aerodynamics heating virtually and retains its shape. The streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jacket, combined with the Heat Shield Tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions.


  • Cartridge: 6.5 Creedmoor
  • Grain Weight: 140 Grains
  • Quantity: 20 Rounds
  • Muzzle Velocity: 2,710 fps
  • Muzzle Energy: 2,283 lb/ft
  • Bullet stype: Polymer Tip
  • Bullet Brand and Model: Hornady ELD Match
  • Reloadable, Non-corrosive Brass
  • G1 Ballistic Coefficient: 0.61
  • Sectional Density: 0.287
  • Test Barrel Length: 24 Inches
  • Velocity Rating: Supersonic

Was this information helpful?

  • Shipping Weight: 1.05lbs. - Please Note: Most packages will require extra packing materials.
  • You must be 21 years or older to purchase loaded ammunition and hazardous items.
  • Ammo must ship UPS ground.
  • Due to Department of Transportation regulations, we cannot accept returns on ammo.
  • If shipped by air loaded ammunition will be charged $40.00 per box.
  • This product can only be shipped within the continental united states.
  • This item may have additional shipping charges if shipped by air.
  • Due to shipping regulations this item can not be shipped through the postal service.
  • Regulations may not allow this item to be shipped to specific states or zip codes.
  • This item is regulated by the US STATE DEPARTMENT and may require an EXPORT LICENSE for international orders.
There are no special offers for this product at this time.

Product ID Number
- Part No. 81500

Weight & Dimension
- Length: 5.2500
- Height: 1.1250
- Width: 3.0000
- Weight: 1.2100LB(s)

Bullet Specifications
- G1 Ballistic Coefficient: 0.6460
- G7 Ballistic Coefficient: 0.3260
- Minimum Twist: N/A
- Sectional Density: 0.2870

Bullet / Ammo Application
- Target Match

The difference between competing and dominating. We carefully select every component to ensure uniformity, then load to exacting specifications to provide pinpoint accuracy. Each cartridge is loaded with either Hornady®


bullets, our high-performance boattail hollow points, or the new, radically superior ELD® Match bullets. Stringent quality control ensures proper bullet seating, consistent charges and pressures, optimal velocity, consistent overall length and repeatable accuracy.


The new Heat Shield™ tip on the ELD® Match bullet creates the perfect meplat and outperforms BTHP bullets.


Hornady® Match™ rifle ammunition is loaded with the most accurate, consistent match bullets in the world, featuring our AMP® bullet jackets.


Cases are carefully selected based on strict criteria: wall thickness uniformity, internal capacity, case weight and consistent wall concentricity.


Powder is matched carefully to each specific load for optimal pressure, velocity and consistent accuracy.


With extremely tight tolerances and strict quality control, all Hornady® Match™ ammunition features superior lot-to-lot consistency. From the bullet seating to the optimal charges and velocities, Hornady® Match™ ammunition is designed to live up to company founder, J.W. Hornady's original goal: "Ten bullets through one hole."