Since 1969

Case Mouth and Neck Tension Gage 25 / 6.5mm / 7.0mm

Ballistic Tools # CMG002 |  Item # 057-CMG002
  • Case Mouth and Neck Tension Gage 25 / 6.5mm / 7.0mm
  • Case Mouth and Neck Tension Gage 25 / 6.5mm / 7.0mm
  • ballistic-tools-inc

DESCRIPTION

Case Mouth and Neck Tension Gage 25 / 6.5mm / 7.0mm
by Ballistic Tools


Measuring neck diameter with calipers is an iffy proposition at best. A small burr on the case mouth, a slight angle to the calipers, or even just placing too much tension on the calipers can give distorted readings. Improper neck tension can make projectile insertion more difficult, or even cause a safety issue if the neck is too loose.

Using our gage solves all those problems. It can knock off a small burr during insertion, and will not distort the round shape of the mouth like calipers will.

This gage is for 6.5mm (.264) and 7mm (.284) diameter calibers.

This case mouth gage is a quick and reliable way to test your neck sizing and neck tension. It is a tool I developed for my own use and I could not do without it. Order yours today.


Was this information helpful?

  • Shipping Weight: 0.07lbs. - Please Note: Most packages will require extra packing materials.
There are no special offers for this product at this time.
No manufacturer information available.

--%>