Since 1969

24 Nosler Competition Neck Die

Redding # 56320 |  Item # 076-56320
  • 24 Nosler Competition Neck Die
  • redding-reloading
$143.33
Quantity
Status: In Stock

DESCRIPTION

24 Nosler Competition Neck Die
by REDDING RELOADING PRODUCTS


Product Overview

Midsouth now offers the 24 Nosler Competition Neck Die. Redding uses only top of the line steel alloy to machine their dies. The Redding 24 Nosler Competition Neck Sizing Die is guaranteed to return your brass to SAAMI standards. The Neck Sizing Dies are heat treated to ensure a perfect sizing every time on all quality brass. The 24 Nosler dies have a neck expander and decapping rod built right in to perform all the steps to prep your cases for primer, powder and a bullet. These Competition dies use precision ground bushings that comes in increments of .001 to ensure you are getting 100% of the possible performance from you brass and your cartridges.

*NOTE Bushings not included. The easiest way to determine the proper bushing size for your cartridge is to measure the neck diameter of several loaded or dummy rounds. (These dummy cartridges can be loaded with your old set of dies or a borrowed set.) Then, simply subtract 0.001" from the cartridge that had the smallest average measurement. This will allow for a slight amount of spring back and create a proper press fit for the bullet.

Specifications and Features:

  • High Quality, Heat Treated Steel
  • Precision Machined to exact SAAMI Standard
  • Neck Expander and Decapping Rod Built in
  • Bushings are in .001" Increments
  • Lifetime Warranty from Redding

*Please note* All defective returns must be made through Redding directly. You can visit their website by Clicking Here or call them at (607) 753-3331.

Was this information helpful?

  • Shipping Weight: 0.57lbs. - Please Note: Most packages will require extra packing materials.
There are no special offers for this product at this time.
There are no details for this product at this time.