Since 1969

40 S&W /10mm Auto Carbide Competition Pro Series Set

Redding # 58253 |  Item # 076-58253
  • 40 S&W /10mm Auto Carbide Competition Pro Series Set
  • redding-reloading
Status: In Stock


40 S&W /10mm Auto Carbide Competition Pro Series Set


The "Pro Series", for use in progressive reloading machines, is a specially prepared three (3) die set. Since the most popular machines do not make use of an expander die, it has been eliminated in the new "Pro Series" sets. The sizing die is the extraordinary Redding Titanium Carbide, complete with a decapping unit. A superior crimp can be accomplished if it is done in a separate operation from the bullet seating. For this reason the "Pro Series" bullet seating die is designed for bullet seating only, with no crimping feature. Our Profile Crimp die is supplied for the final crimping.

For cartridges that headspace on the case mouth, a Taper Crimp die is substituted. All dies in the set have a special large radius at the mouth for easy case entry, a necessary feature for progressive machines.

Specification & Features:

  • Full Length Sizing Die
  • Competition Seating Die
  • Profile Crimp Die
  • Shell holder sold separately(item number: 07611005)

*Please note* All defective returns must be made through Redding directly. You can visit their website by Clicking Here or call them at (607) 753-3331.

Was this information helpful?

  • Shipping Weight: 2.00lbs. - Please Note: Most packages will require extra packing materials.
There are no special offers for this product at this time.
No manufacturer information available.