DESCRIPTION
6mm Creedmoor Premium Series Deluxe 3 Die Set
by REDDING RELOADING PRODUCTS
Product Overview
Midsouth offers Redding Reloadings 6mm Creedmoor Premium Series Deluxe 3 Die Set. This Premium Series Deluxe 3 Die set features a Full Length Sizing Die with a Carbide Size Button, the Bullet Seating Micrometer on the seating die and an additional Standard Neck Sizing Die.
Reddings Premium Series die set has a patented design with tighter manufacturing tolerances due to the details of the patented seating stem system. The 6mm Creedmoor Set bullet guide to seating stem fit is so precise that the seating stem can actually "float" on a column of air. The Premium Series die seating stem for the 6mm Creedmoor is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before the bullet seating begins. The Premium Series die micrometer is calibrated in .001" increments for precise seating depth and is infinitely adjustable (without clicks). The micrometer also has a setting feature that allows you to set the micrometer to your rifle or favorite seating depth. The Neck Sizing Dies are heat treated to ensure a perfect sizing every time on all quality brass. The 6mm Creedmoor dies have a neck expander and decapping rod built right in to perform all the steps to prep your cases for primer, powder and a bullet. These Premium Series dies use precision ground bushings that come in increments of .001 to ensure you are getting 100% of the possible performance from you brass and your cartridges. Also included in this set is the Standard Neck Sizing die that will allow you to perform SAAMI neck sizing without bushings.
*NOTE Bushings not included. The easiest way to determine the proper bushing size for your cartridge is to measure the neck diameter of several loaded or dummy rounds. (These dummy cartridges can be loaded with your old set of dies or a borrowed set.) Then, simply subtract 0.001" from the cartridge that had the smallest average measurement. This will allow for a slight amount of spring back and create a proper press fit for the bullet.
Specifications and Features
- Patented Seating Stem System
- Full Length Sizing Die with a Carbide Size Button
- Seating Die with Bullet Seating Micrometer
- Standard Neck Sizing Die
- Precision Ground
- Micrometer Settings .001
- Case and Bullet Supported
- Standard Neck Sizing Die Included
*Please note* All defective returns must be made through Redding directly. You can visit their website by
Clicking Here or call them at (607) 753-3331.