DESCRIPTION
M&P Flat Faced Forward Set Sear and Trigger Kit
by Apex Tactical
Midsouth carries the M&P Flat Faced Forward Set Sear and Trigger Kit from Apex Tactical. The M&P Flat Faced Forward Set Sear and Trigger Kit is designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber, the Apex Flat-Faced Forward Set Sear & Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights.
Specifications and Features:
- Works with all Smith & Wesson M&P Pistols (excluding M&P M2.0) in all centerfire calibers and configurations.
- Does NOT function in the M&P M2.0, M&P Shield, BodyGuard, 22 or 22 Compact pistols.
- Requires the use of the sear housing block designed for the large size sear plunger and spring
- Lowers trigger weight between 3.0 and 4.0 lbs
- Smooth uptake and reset
- Total trigger travel similar to most factory 1911 type pistols
- Center mounted pivoting safety maintains factory safety values
- Easy to install
Comes with:
- Flat-Faced Forward Set Trigger
- Forward Set Sear
- Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
- Forward Set Spring Kit (Silver Trigger Return Spring, Green Trigger Return Spring, Polymer Slave Pin, Sear Spring and Blue RAM Spring)
Note:This particular product usually requires a slight modification to the trigger bar loop for proper function. This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.