Since 1969

M&P Red Flat Faced Forward Set Sear and Trigger Kit

Apex Tactical Specialties # 100055 |  Item # 157-100055
  • M&P Red Flat Faced Forward Set Sear and Trigger Kit
  • M&P Red Flat Faced Forward Set Sear and Trigger Kit
  • Apex
$175.75
Quantity
Status: In Stock
  • This item has restrictions that may prevent its sale by age or location.

DESCRIPTION

M&P Red Flat Faced Forward Set Sear and Trigger Kit
by Apex Tactical


Midsouth carries the M&P Red Flat Faced Forward Set Sear and Trigger Kit from Apex Tactical. The M&P Red Flat Faced Forward Set Sear and Trigger Kit is designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber, the Apex Flat-Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights.

Specifications and Features:

  • Works with all Smith & Wesson M&P Pistols (excluding M&P M2.0) in all centerfire calibers and configurations.
  • Does NOT function in the M&P M2.0, M&P Shield, BodyGuard, 22 or 22 Compact pistols.
  • Requires the use of the sear housing block designed for the large size sear plunger and spring
  • Lowers pull weight to between the 3lb (silver spring) and 4lb (green spring) mark (dependent on trigger return spring installed)
  • Smooth uptake and reset
  • Reduces pre-travel and over-travel
  • Reduced reset
  • Total trigger travel similar to most factory 1911 type pistols
  • Center mounted pivoting safety maintains factory safety values
  • Easy to install


Comes with:

  • Red Anodized Flat-Faced Forward Set Trigger
  • Forward Set Sear
  • Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
  • Forward Set Spring Kit (White Trigger Return Spring, Green Trigger Return Spring, Polymer Slave Pin, Sear Spring and Blue RAM Spring)


Note:This particular product usually requires a slight modification to the trigger bar loop for proper function. This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.

Was this information helpful?

  • Shipping Weight: 0.10lbs. - Please Note: Most packages will require extra packing materials.
  • This item is regulated by the US STATE DEPARTMENT and may require an EXPORT LICENSE for international orders.
There are no special offers for this product at this time.
No manufacturer information available.

--%>