• 
• 

DESCRIPTION

M&P Aluminum Forward Set Sear and Trigger Kit
by Apex Tactical

Midsouth carries the M&P Aluminum Forward Set Sear and Trigger Kit from Apex Tactical. The M&P Aluminum Forward Set Sear and Trigger Kit is machined from aircraft-grade aluminum and black hard anodized to last a lifetime. The smooth faced trigger comes assembled with a center pivoting safety. The Forward Set Sear & Trigger Kit boasts a smooth trigger pull throughout the break. The kit comes with two (2) trigger return springs; one designed to produce approximately a 4.0 lbs trigger pull (silver spring), and one to produce a 5.0 lbs trigger pull (green spring). These two options give the end user the ability to customize their trigger pull for their specific needs. Dropping this kit into your Smith & Wesson M&P will set the trigger break point farther forward than the factory trigger assembly, as well as significantly reduce the uptake and over travel. It produces a trigger pull very similar to that of a 1911 but in a polymer frame striker-fired pistol.

Specifications and Features:

• Works with all Smith & Wesson M&P Pistols (excluding M&P M2.0) in all centerfire calibers and configurations.
• Does NOT function in the M&P M2.0, M&P Shield, BodyGuard, 22 or 22 Compact pistols.
• Requires the use of the sear housing block designed for the large size sear plunger and spring
• Reduced trigger pre-travel and over travel to produce a feel similar to a single action fire control system
• Overall reduction in trigger travel is approximately 50%
• A smooth trigger pull all the way through to the break
• Reduced reset
• Center mounted pivoting safety maintains factory safety values
• 4.0 lbs (silver spring) or 5.0 lbs (green spring) trigger pull weight, depending on which trigger return spring is installed
• Lowers trigger weight to approximately 4.0 lbs (silver spring) and 5.0 lbs (green spring)
• Smooth uptake and reset
• Center mounted pivoting safety maintains factory safety values
• Works with all Smith & Wesson M&P pistols in centerfire calibers (excluding the Shield)
• Easy to install

Comes with:

• Aluminum Forward Set Trigger
• Forward Set Sear
• Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
• Forward Set Spring Kit (Silver 4.0lb Trigger Return Spring, Green 5.0lb Trigger Return Spring, Polymer Slave Pin, Sear Spring and Blue RAM Spring)

Note:This particular product usually requires a slight modification to the trigger bar loop for proper function. This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.

• REVIEWS
• DELIVERY INFO
• SPECIAL OFFERS
• MANUFACTURER INFO