DESCRIPTION
M&P M2.0 Shield Action Enhancement Trigger and Duty Carry Kit
by Apex Tactical
Midsouth carries the M&P M2.0 Shield Action Enhancement Trigger and Duty Carry Kit from Apex Tactical. The M&P M2.0 Shield Action Enhancement Trigger and Duty Carry Kit s a combination of the Apex Duty/Carry Kit for the M&P Shield 2.0 and the Apex Action Enhancement Trigger for the M&P Shield 2.0. The Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body which reduces pre-travel and over-travel by approximately 20%. It features a smooth face with a center mounted pivoting safety that maintains factory safety values. The M&P M2.0 Shield Action Enhancement Trigger and Duty Carry Kit as designed to provide the M&P Shield 2.0 pistol owner a smooth, consistent trigger pull that is approximately 1-2 lbs lighter (based on variations in factory tolerances and the combination of springs used) with the advantages of shorter over-travel and more detectable trigger reset. However, armorer or gunsmith installation of the Ultimate Striker Block (USB) into the Shield slide is strongly recommended.
Specifications and Features:
- Works with all Smith & Wesson M&P Shield 2.0 Pistols in 9mm and .40 calibers.
- NOT for use in the Shield (9mm and .40 calibers).
- NOT for use in the Shield 45.
- Reduces trigger pull by approximately 1-2 lbs.
- Smooth uptake and reset
- Reduces pre-travel
- Reduces over-travel
- Reduced reset
- Center mounted pivoting safety maintains factory safety values
Comes with:
- Aluminum Action Enhancement Trigger for M&P Shield 2.0
- 1-Dot Fully Machined Sear
- Ultimate Striker Block
- Striker Block Spring
- Sear Spring (1/8")
- Trigger Return Spring
- Slave Pin (to assist with trigger return spring installation)
- Talon Tactical Tool
Note: If you are interested in a replacing the trigger itself, please see Action Enhancement Trigger for the Shield 2.0. he Shield sight removal in order to install the USB Kit is extremely difficult. Removal requires delicate precision so as not to damage the sights or slide. We highly recommend having a competent gunsmith perform this task.