Since 1969

22 Caliber Seater Die - 220 Swift, 22 Nosler, 219 Zipper, 22 Creedmoor, 224 Weatherby Magnum, etc.

Hornady # 044127 |  Item # 005-044127
  • 22 Caliber Seater Die - 220 Swift, 22 Nosler, 219 Zipper, 22 Creedmoor, 224 Weatherby Magnum, etc.
  • hornady
Status: In Stock


22 Caliber Seater Die - 220 Swift, 22 Nosler, 219 Zipper, 22 Creedmoor, 224 Weatherby Magnum, etc.

Product Overview:

Hornady Seater Dies are designed from high quality steel and machined and polished to an ultra-smooth finish. They include a Hornady Sure-Loc lock rings so that it stays adjusted to the setting you desire. These dies have a built in crimp ring so that you do not need to purchase an additional die.

Works for:

  • 220 Swift
  • 22 Nosler
  • 219 Zipper
  • 22 Creedmoor
  • 224 Weatherby Magnum
  • 225 Winchester
  • 5.6x50 Magnum
  • 5.6x62R
  • 22 Savage Hi-Power
  • 22-6mm

Was this information helpful?

  • Shipping Weight: 0.66lbs. - Please Note: Most packages will require extra packing materials.
There are no special offers for this product at this time.

Product ID Number
- Part No. 044127

Weight & Dimension
- Length: 6.8750
- Height: 1.2500
- Width: 1.2500
- Weight: 0.6330LB(s)

Hornady® reloading dies represent the finest in machined craftsmanship. Precise machining allows accurate reloading by offering easier adjustments, better alignment and smooth functioning. With one of the finest internal finishes in the industry, Hornady® reloading dies provide a lifetime of reloading. They’re so well-crafted that they’re guaranteed never to break or wear out from normal use. The Hornady® Seating Die features an alignment sleeve (comes standard – other manufacturers charge extra for this feature) and a seater adjustment screw with lock ring and rubber washer for necessary tension to make fine bullet seating depth adjustments and works to keep the die set together. Key to the Seating Die is the In-line Bullet Seating System that holds the bullet, the case neck and the seating stem in perfect alignment in the floating sleeve


the bullet enters the neck of the case for optimum seating and enhanced accuracy results. Additionally, this die features a built-in crimper that allows roll crimping without the need for an extra crimp die, saving a step in the process or a station on your press. The Hornady® Seater Die has a retainer ring toward the base of the die that removes in seconds for easy disassembly and cleaning of the die. This die comes with a Hornady® Sure-Loc™ lock ring that clamps around the entire die body applying constant pressure to hold the ring in place. The locking screw tightens the ring without coming into contact with the threads, and the incorporated wrench flats allow easy removal or replacement of the die and eliminates possible damage from pliers.


• In-line Bullet Seating Die and Sure-Loc™ Lock Ring • Standard Bullet Seating Stem • 7/8”-14 thread die that works with all presses that accept standard dies. Does not include a shell holder. Other accessories sold separately. Hornady®


Die Bushings are necessary for use with modern Hornady® reloading presses: Hornady Item number 044094 (2-Pack), 044093 (3-Pack), 044096 (10-Pack). Hornady® recommends spraying all metal parts with Hornady® One Shot® Gun Cleaner & Lube: Hornady Item number 99901 (10 oz aerosol) 9990 (5 oz aerosol). No-risk, Lifetime warranty. See for more information.