DESCRIPTION
M&P Shield Duty Carry Kit
by Apex Tactical
Midsouth carries the M&P Shield Duty Carry Kit from Apex Tactical. The M&P Shield Duty Carry Kit was designed to provide the Shield pistol owner a smooth, consistent trigger pull that is approximately 2 lbs lighter (based on variations in factory tolerances) with the advantages of shorter over-travel and more detectable trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. However, armorer or gunsmith installation of the Ultimate Striker Block (USB) into the Shield slide is strongly recommended
Specifications and Features:
- Works with all Smith & Wesson M&P Shield Pistols in 9mm and .40 calibers.
- Works in conjunction with the Apex Shield Action Enhancement Trigger, or as a stand-alone with the factory trigger.
- NOT for use in the Shield 2.0.
- NOT currently for use in the Shield 45.
- Reduces trigger pull by approximately 2 lbs.
- Smooth uptake and reset
- Reduces reset length
- Reduces over-travel
Comes with:
- 2-Dot Fully Machined Sear
- Ultimate Striker Block
- Striker Block Spring
- Talon Tactical tool
- Sear Spring (1/8")
- Slave Pin (to assist with trigger return spring installation)
- Trigger Return Spring
Note:If you are interested in a replacement trigger for the M&P Shield, please see the Shield Duty/Carry Action Enhancement Trigger and Kit. For further information regarding the trigger itself, please see Shield Action Enhancement Trigger. The Shield sight removal in order to install the USB Kit is extremely difficult. Removal requires delicate precision so as not to damage the sights or slide. We highly recommend having a competent gunsmith perform this task.