• 
• 

DESCRIPTION

M&P 2.0 Polymer Enhancement Trigger & Duty Carry Kit Black
by Apex Tactical

Midsouth carries the M&P 2.0 Polymer Enhancement Trigger & Duty Carry Kit Black from Apex Tactical. The M&P 2.0 Polymer Enhancement Trigger & Duty Carry Kit Black directly replaces the factory hinged trigger with a solid body polymer trigger, and a center mounted pivoting safety. The rounded face of the trigger provides a smooth comfortable surface for the shooter’s finger while firing. The trigger also reduces pre-travel and over-travel from the factory trigger. The M&P 2.0 Polymer Enhancement Trigger & Duty Carry Kit Black is engineered to provide the M&P M2.0 (and M&P 45) pistol owner with a smooth, consistent 5.0 to 5.5 lbs. trigger pull with the advantages of shorter over-travel and shortened trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. The kit itself is designed to be drop-in and should not require further gunsmithing, however, armorer or gunsmith installation is recommended.

Specifications and Features:

• Works with the Smith & Wesson M&P M2.0 (9mm/.40S&W/.45ACP), M&P M2.0 Compact, and the M&P (v1.0) 45.
• Not for use in the M&P 9mm/40S&W models.
• Does NOT function in the M&P Shield.
• Does NOT function with the Apex Forward Set Sear and Trigger Kits
• Smooths trigger pull
• Reduces trigger pre-travel and over-travel by approximately 30%
• Reduces reset length
• Reduces trigger pull weight by approximately 1 lb. for a pull weight around 5-5.5 lbs for Duty/Carry applications
• Center mounted pivoting safety maintains factory safety values

Comes with:

• Polymer Action Enhancement Trigger
• Heavy Duty 1/8" Sear Spring
• Slave pin (assists with installation of trigger return spring)
• 2-Dot Fully Machined Sear
• Duty Carry Trigger Return Spring
• Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)

Note: In the M&P 45 (this does not apply to the M2.0), you may need to make an adjustment to the trigger bar loop for proper function. This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring.

• REVIEWS
• DELIVERY INFO
• SPECIAL OFFERS
• MANUFACTURER INFO