Since 1969

The Answer Gen 3 Self Timing Muzzle Brake 1/2x28 Thread .223 Caliber Nitrided Finish

American Precision Arms # AN322 |  Item # 353-AN322
  • The Answer Gen 3  Self Timing Muzzle Brake 1/2x28 Thread .223 Caliber Nitrided Finish
  • american-precision-arms
$170.00
This item SHIPS FREE!
Quantity
Status: In Stock

DESCRIPTION

The Answer Gen 3 Self Timing Muzzle Brake 1/2x28 Thread .223 Caliber Nitrided Finish
by American Precision Arms


Midsouth carries the The Answer Gen 3 Self Timing Muzzle Brake 1/2x28 Thread .223 Caliber Nitrided Finish from American Precision Arms. APA is known for solving big recoil problems, not small ones. For years competitive shooters have asked them to develop a brake for the off-hand, run-and-gun, "Gas Gun" competitor. They found this little recoil problem was a little more dynamic then anticipated and wanted to give these shooters their Bastard ports but that wasn't enough. The competitive shooter needs something really light weight, but even more, tunable.

APA developed the U.R.P. Adjustable Gas System. These aren't just randomly placed top ports. Every port is placed adjacent to the internal Bastard tooth where there is maximum pressure build-up. This makes the adjustable ports directionally effective. ALSO because of our self-timing Gen 2 system the brake is cant-able. The unique tunable gas system combined with the trademark APA ports work together to achieve a sight picture that does not move when the rifle is fired. There are 8 directional gas ports that can be tuned to counteract you’re U.R.P. (unique recoil profile). There are 256 combinations to keep your sights on target. To calibrate the APA muzzle brake to your U.R.P., start testing with all the gas screws installed. Pay attention to the movement of your red dot, irons or crosshairs, and begin removing the gas screws as the recoil requires. When the gas screws are removed on the right side, the rifle will be shifted left. For the opposite effect simply remove the screws on the left. The gas holes closer to the nut have a more dramatic effect and the ports closer to the brake crown have a lesser effect. When you find your U.R.P. combination, Threadtite your screws into place.

Note: The Answer muzzle brake is meant for smaller barrels from AR-15's to hunting rifles. APA recommends a barrel diameter of .600-.750 inches for this brake.

Specifications and Features:

  • Length is 2.20" and Weighs 2.2 oz
  • Each brake includes set screws, an Allen wrench one, and a single-use Threadtite.

Was this information helpful?

  • Shipping Weight: 0.20lbs. - Please Note: Most packages will require extra packing materials.
There are no special offers for this product at this time.
There are no details for this product at this time.