Since 1969

Powder Cop Die

Hornady # 050063 |  Item # 005-050063
  • Powder Cop Die
  • hornady
$39.99
Quantity
Status: In Stock

DESCRIPTION

Powder Cop Die
by HORNADY


Product Overview:

For use on your progressive press after the powder drop station to automatically check dropped charges (a smart practice, often ignored). The Hornady Powder Cop Die has an internal stem that will move up to display a white o-ring that is even with the surface of the die when the correct powder charge is in the case. If there is no powder charge, the stem will not rise. If there is an overcharge of powder, the stem will lift the O-ring well above the surface of the powder cop die, indicating an over charge. Hornady uses a similar device on their own ammo manufacturing presses. It won’t replace careful attention, but helps monitor the reloading process.

Was this information helpful?

  • Shipping Weight: 0.45lbs. - Please Note: Most packages will require extra packing materials.
There are no special offers for this product at this time.

Product ID Number
- Part No. 050063


Weight & Dimension
- Length: 5.7500
- Height: 1.5000
- Width: 1.5000
- Weight: 0.4570LB(s)


Install on your progressive press after the powder drop station to automatically check dropped charges. Checking powder charges on your progressive press can be difficult, and is sometimes ignored, even though it’s a smart practice. Hornady® uses a similar device on our own ammo manufacturing presses. It won’t replace careful attention, but helps monitor the reloading process. Works with all powder types and cartridges.